. The Key Could Snap Inside the Lock
If you regularly have to jiggle, twist or apply excessive force to operate a lock, the key is being subjected to unnecessary stress.
Keys can weaken through repeated use, and a poorly cut key may make the situation worse. If it snaps inside the cylinder, you may need a locksmith to extract the broken section and check the lock for damage.
How to Spot a Poorly Cut Key
Before using a newly copied key regularly, check for these warning signs:
-
Rough or sharp edges: The key has visible burrs or feels poorly finished.
-
Different cut positions: The cuts do not match the original key accurately.
-
Difficult insertion: The key does not slide into the lock smoothly.
-
Stiff operation: The key turns with noticeably more resistance than the original.
-
Difficulty removing the key: The key sticks or needs to be moved around before it comes out.
A key can look perfectly acceptable and still be cut inaccurately. Testing its operation gently is more useful than judging its appearance alone.
What Should You Do If a New Key Doesn't Work Properly?
If a newly cut key sticks or will not turn smoothly, stop using it rather than repeatedly forcing it.
-
Compare it with the original key, if available.
-
Return to the key-cutting service and ask them to check the cut and blank.
-
Test the corrected key gently.
-
If the original key also sticks, have the lock checked for wear, damage or another underlying fault.
Avoid filing the key yourself unless you know exactly what needs correcting. Removing material in the wrong place can make the key unusable.
Can a Poorly Cut Key Invalidate a Lock Guarantee?
It depends on the manufacturer's terms and the circumstances of the fault.
At A.L.S Locksmith, our parts guarantee excludes damage caused by non-standard or poorly cut keys, including cheap copies that damage a supplied and fitted component. Using a correctly cut key helps protect the lock and reduces the risk of avoidable problems.
If a lock starts becoming stiff after using a new key, stop and investigate the cause before further use.
Locksmith Advice from A.L.S Locksmith
A key should operate smoothly without excessive force. If you find yourself repeatedly jiggling the key, struggling to remove it or forcing it to turn, something may be wrong.
The problem could be the key itself, a worn cylinder, door misalignment or a fault with the locking mechanism. Replacing the lock immediately isn't always necessary, but identifying the cause is important.
A.L.S Locksmith provides lock repairs, cylinder replacements and UPVC door mechanism repairs across Paisley, Glasgow and the surrounding areas.
A poorly cut key can become an expensive problem. If your key doesn't work smoothly, stop using it and get it checked before the lock fails.
